◀ back to the website
recent topics
recent posts
Search
faq
Anza Borrego Desert
Register
Lost password
remember me
show rated messages only
Home
▶
Completed Trips
Talk about a trip you took out to Anza Borrego
Agua Alta overnight
Brian
Posts:
230
12 days ago
Brian
Posts:
230
Last weekend after Thanksgiving I did an overnight hike to Agua Alta spring. I was considering spending an extra day and doing a dayhike to Jack Miller cabin, but I would have needed to refill water at the spring for that. There was a small amount of water, but it was green and stagnant and there was no new flow coming in. It would have worked in an emergency, but for my purposes I decided to give it a miss. I had carried 6 liters which ended up being the right amount for my 2 day / one night trip.
I have a map published by the Santa Rosa and San Jacinto National Monument which lists the distance to Agua Alta as 8.8 miles, but according to my tracker it was a little over 10 from the Cactus Spring parking area. This map mentions that the trail becomes indistinct and hard to follow past Cactus Spring. It actually was easier than I was imagining. There were many sections that were well marked with cairns, but there were also sections (especially crossing washes) where it was easy to lose the trail and I was glad to have GPS.
I noticed that the trail on the "mapbuilder topo" layer of CalTopo didn't seem to be accurate past the 5168 saddle. There are a lot of straight lines with no regard to the topography. I used the "scanned topo" (USGS) layer which agreed with the cairns I was seeing.
This is near Cactus Spring and reminded me of similar rock piles I've seen in Rockhouse Valley. Burial mound?
Typical scenery along the way
Now that's a cairn!
backside of Toro
Shortly after cresting the 5168 saddle. The Salton Sea is sorta visible through the haze and the Santa Rosa crest is on the right
Agua Alta
A native site near the spring
+3
link
Rocko1
Posts:
600
3 days ago
Rocko1
Posts:
600
Very cool area. Looks like a great place to explore.
link
share a link to this post
close
Powered by
Jitbit Forum
8.3.8.0
© 2006-2013 Jitbit Software